歡迎訪問貴州新貴景觀木業有限公司官方網址

1511142951129986.png

 

image.png       image.png

畢節防腐木廠

新聞分類

產品分類

聯系我們

貴州新貴景觀木業有限公司

鄭 總:186-8572-5990

          186-7828-7826 

郵 箱:[email protected]

網 址:www.flddp.tw

地 址:貴州省畢節市七星關區鴨池鎮貴畢大道鵬飛挖機市場門面


淺談防腐木變形了如何解決

您的當前位置: 畢節防腐木廠 >> 畢節防腐木廠

淺談防腐木變形了如何解決

發布日期:2018-02-26 作者:畢節防腐木 點擊:

淺談防腐木變形了如何解決

How to solve the deformation of anticorrosion wood

畢節防腐木

防腐木材本身的能力非常出色,受到很多人的青睞,比如說密度和強度都很高,在使用方面能節省很多的麻煩,同時在使用防腐木做裝飾的時候,因為防腐木經過特殊的加工,所以自然紋路是很清晰的,非常的美觀。但是在這些優勢的背后大家可以發現,因為防腐木的本體是木材,所以難免會遇到開裂和變形等問題,那么遇到了這部分問題,要如何去解決呢?

The anti-corrosion wood itself is very good, favored by many people, such as strength and density are very high, can save a lot of trouble in use, and decoration in the use of wood, because the wood preservative through special processing, so the natural texture is very clear, very beautiful. But we can see behind these advantages. Because the body of antiseptic wood is wood, so it will inevitably encounter problems such as cracking and deformation. So how do we solve this problem?

為何會開裂和變形?

Why do they crack and deform?

木材之所以會變形,主要是因為內部的壓力,而木材開裂則是木材表面的問題,但是其實會出現開裂和變形的根本原因,在于木材的含水率問題。因為木材是年輪組成的,但是板材的表面如果年齡不相等,對于水分的反應快慢有所不同,那么只有通過變形來維持木材的平衡。

Wood deformation is mainly due to internal pressure, while wood cracking is the problem of wood surface. But the ultimate reason for cracking and deformation is wood moisture content. Because wood is made up of annual rings, but if the age of plates is not equal, the response to moisture is different.

一般來說只要是木材,都會出現這樣的情況,很多人都擔心自己購買了防腐木材料,但是卻出現了變形和開裂的情況,大家要知道,這些情況是在所難免的,所以此時最應該注意到的問題,就是如何去有效的防止開裂和變形。

In general as long as wood, will be the case, a lot of people are worried about their purchase of wood preservative materials, but the deformation and cracking of the, you know, this is the most can hardly be avoided, so we should pay attention to the problem is how to effectively prevent deformation and cracking.

畢節防腐木認為如何做才能防止防腐木出現變形和開裂的現象

Bijie anticorrosive wood can prevent the occurrence of deformation and cracking of anticorrosive wood

大家要知道,防腐木使用時間長了就可能會出現這樣的情況,那么企業要如何去做呢?當然是要注意到一些防腐劑的問題。雖然說防腐木本身的性能很強悍,但是如果經受長時間的風吹雨打,這些性能也很難保持。所以一般來說,首先要涂抹比較好的防腐劑放置大量水分進入防腐木,之后還應該注意到蟲蛀的問題,解決了這部分問題,才能確保防腐木的使用周期是非常長的。

As we all know, preservative wood can be used for a long time when it is used for a long time. So how can enterprises do it? Of course, we should pay attention to some preservatives. Although the performance of anticorrosive wood itself is very tough, but if long time exposed to wind and rain, these properties are difficult to maintain. So generally speaking, first of all, apply a good preservative, put a lot of water into the wood. After that, we should pay attention to the problem of moth and solve this problem, so as to make sure that the use period of the antiseptic wood is very long.

當然在維護防腐木的時候還應該注意到,有些情況下并不是只要一開始把這部分工作做好了,后邊的工作就不用做了,肯定不是這樣的。大家要知道,定期維護,才是企業最應該做的事情。一般來說最好是半年或者一年去檢查一次,看看當前防腐木產品的實際情況是怎么樣的,之后針對不同的問題,去進行不同的維護工作,最終確保工作的實際結果。貴州防腐木廠家今天就分享到這里了。如果這邊還有什么不了解的可以來我們公司了解了解情況。

Of course, when maintaining the preservative wood, we should also notice that in some cases, it is not necessary to start doing the work at the very beginning, but not to do the work behind it, which is certainly not the case. We should know that regular maintenance is the most important thing that the enterprise should do. Generally speaking, it is best to check once a half year or a year to see what the actual situation of the current antiseptic wood products is. After that, we do different maintenance work for different problems, so as to ensure the actual result of the work. Guizhou antiseptic wood manufacturers are here today. If there is something wrong here, we can come to our company to understand the situation.


本文網址:http://www.flddp.tw/news/470.html

相關標簽:畢節防腐木

最近瀏覽:

在線客服
分享 一鍵分享
歡迎給我們留言
請在此輸入留言內容,我們會盡快與您聯系。
姓名
聯系人
電話
座機/手機號碼
郵箱
郵箱
地址
地址
10000炮捕鱼游戏 新天地彩票一新天地彩票平台 四川时时变数字 江苏快三分布走势图 彩金捕鱼ol红包版 北京pk计划费下载 3d太湖字谜今天 3走势图500 新时时中奖规则 5分赛车 重庆时时彩3星遗漏数据 秒速时时走势规律 3d走势 11选五走势图 北京快乐8大小开奖結果 老时时历史开奖61号码 北京赛车pk10开奖历史